| | GEARMOTORS & SPEED REDUCERS
|
| Series 1000 Fractional Horsepower AC & DC Gearmotors
Applications:
• 1/12 to 3/4 HP Designs
• Available in AC & DC
• TEFC Enclosure (meets IP55 on AC and IP44 on DC)
• Integral Foot Mounting
• Cut & Ground Helical Gearing
• Factory Filled with Synthetic Oil
• Double Lipped Oil Seals
• Ball Bearing Throughout
• CSA & CE Compliant
• Flanged and Face Mount Options Available
|
| AC Foot Mounted
Features:
• 1/12 to 3/4 HP Designs
• 60Hz 208-230/460 & 575 VAC
• 1:4 Reduction Stages
• TEFC Enclosure
• "FO" Motor Conduit Box
• Integral Foot Mounting
• CSA & CE Compliant
|
| AC Flange Mounted
Features:
• 1/12 to 3/4 HP Designs
• 60Hz 208-230/460 & 575 VAC
• 1:4 Reduction Stages
• TEFC Enclosure
• "FO" Motor Conduit Box
• Face and Flanged Mounting
• CSA & CE Compliant
|
| DC Foot Mounted
Features:
• 1/12 to 3/4 HP Designs
• 90 Volt PM Motor
• 1:4 Reduction Stages
• TEFC Enclosure
• "FO" Motor Conduit Box
• Integral Foot Mounting
• CSA & CE Compliant
|
| Series 2000 Gearmotors and Speed Reducers
• Broad Range of Gearing and Input Styles -Gearmotor, Input Shaft, C-Face, Scoop.
• Innovative Self Locking Tapered Shaft Connection allows on-site replacement with out removing oil, primary pinion, or disconnecting the load.
• Broadest Line of Motor Ends -TEFC (single phase and 3 phase), explosion proof, corro-duty, inverter duty, brakemotor. Stocked at over 300 distributors and priced at c-face levels
|
| MbN Helical Shaft Mount
• Tapered bushing design.
• 1/3 through 30HP gearmotors.
• Output torque through 26,000 In. Lbs.
• Ratios from 3.15:1 to 6300:1
|
| CbN Series In Line Helical
• Output torque through 145,000 In. Lbs.
• 1/3HP through 75HP gearmotors.
• Ratios from 0.8:1 to 6300:1.
• Footed and flange mounting.
|
| OtN Series Right Angle Helical Bevel
:
• Output torque through 88,000 In. Lbs.
• 1/3HP through 50HP gearmotors.
• Ratios from 12.5:1 to 7100:1.
• Footed, face or flange mounting.
• Solid or hollow output shaft available.
|
| HWN Right Angle Helical Worm
• Output torque through 19,000 In. Lbs.
• 1/3HP to 10HP gearmotors.
• Tapered bushed, finished bore and keyed output shafts.
• Ratios from 8.0:1 to 12500:1.
• Dimensional interchange to leading competitors.
|
| IRA SYNCROGEAR WORM & WORM HELICAL GEARMOTORS & SPEED REDUCERS
:
• Utilize same motor end as Series 2000 Gearmotors
• Foot and flange mount worm and worm helical available.
• Torque range up to 3500 in.-lbs.
• Innovative self-locking taper shaft connection (motor to gear) allows on-site replacement without removing primary pinion, or disconnecting the load. This ensures precision alignment and eliminates fretting to expedite motor removal.
|
| SHAFTMOUNT SPEED REDUCERS
• Shaft Mounted Speed Reducer
• High Efficiency
• Output Torque up to 55,000 in. lbs.
• Available nominal ratios of 5:1, 15:1 and 25:1
• 7 AGMA sizes: 107 - 315
• Multi-position torque arm assembly
• Excellent reversibility
|
