| | Back
| | F7 Drive: 208 to 240 VAC 1/2 to 150 HP, 480 VAC 3/4 to 500 HP
| | 
| | Suggested Use: All conventional Industrial Applications The F7 drive is the Industrial Workhorse of adjustable frequency drives. It is intended to handle every conventional drive application found in the typical industrial manufacturing plant. With excellent performance and the widest array of configurations and options, this can be the single drive platform for an entire facility. Network communications, plug-in cards, custom software, and power/packaging options are among the many choices. Specifications, Catalog |
| |
| | | G7 Drive: 208 to 240 VAC 1/2 to 150 HP, 480 VAC 3/4 to 500 HP
| | 
| Suggested Use: High-end applications requiring increased speed and torque response providing servo-like performance from an induction motor. Open loop torque control and superior motor/installation protection from 3-level control are also possible. This amazing Drive is the ultimate performance solution with increased speed and torque response to provide servo-like performance from an induction motor. The G7 incorporates the world’s first 3-level inverter architecture (480 volt ratings) that eliminates or minimizes the installation problems associated with IGBT switching on 480 volt systems and protects the entire motor-drive system. DriveWorksEZ adds programming ease and flexibility by providing a PC based, graphical icon tool. The G7 supports all of the major network communication protocols including Ethernet Modbus TCP/IP. Specifications and Features, Catalog
| |
| | | P7 Drive: 208 to 240 VAC 5 to 150 HP, 480 VAC 5 to 500 HP
| | 
| Suggested Use: Industrial Fan and Pump and most conventional variable torque applications
The P7 drive is the Industrial Fan/Pump drive. It is the companion to the F7 drive in fit and form. Functionality is designed for variable torque applications such as fans and centrifugal pumps. It is offered with Volts/frequency control and Normal Duty overload of 110% for one minute. Bypass is available. Specifications, Catalog
| |
| | | V7 Drive: 230 VAC 1/8 to 10 HP, 460 VAC 1/2 to 10 HP
| | 
| Suggested Use: General Purpose
The V7 is a low cost, compact drive, operable in V/f or Open Loop Vector mode. In addition to good speed regulation, open loop vector control also provides higher torque at lower speeds. The V7 is ideally suited for applications such as conveyors, grinders, centrifuges, pumps, fans,blowers, machine tools, packaging, food processing, and commercial laundry. For wet and dusty indoor environments, the V74X drive with integral NEMA 4X/12 enclosure is recommended. For DeviceNet network applications, the V7N with embedded Device Net is recommended. Specifications, Catalog
| |
| | | V7N Drive: 230 VAC 1/8 to 10 HP, 460 VAC 1/2 to 10 HP
| | 
| Suggested Use: General Purpose DeviceNet Network The V7N is a general purpose, AC motor drive for facilities using DeviceNet communications. The V7N was created by embedding DeviceNet into the control card of the highly successful V7 drive. The embedded DeviceNet allows 64 network nodes. It includes programmable MAC ID and baud rate. The V7N supports drive type profiles with flash capability for easy software upgrades. Network status LEDs are visible through the cover and a pluggable connector simplifies wiring for added cost reduction. Specifications, Catralog
| |
| | | V74X Drive: 230 VAC 1/8 to 10 HP, 460 VAC 1/2 to 15 HP
| | 
| Suggested Use: General Purpose NEMA 4X / 12
The V74X Drive is low cost, compact, and operable in V/f or Open Loop Vector mode. In addition to good speed regulation, open loop vector control also provides higher torque at lower speeds. The V74X is ideally suited for applications such as conveyors, grinders, centrifuges, pumps, fans,blowers, machine tools, packaging, food processing, and commercial laundry. The V74X drive with integral NEMA 4X/12 enclosure is recommended for wet and dusty indoor environments, instead of the V7 drive. For DeviceNet network applications, the V7N with embedded Device Net is recommended. Specifications, Catalog
| |
| | | J7 Drive: 230 VAC 1/8 to 5 HP, 460 VAC 1/2 to 5 HP
| | 
| Suggested Use: Simple OEM Machines
The J7 is a full-featured, lowest cost, compact drive. It is ideal for applications such as conveyors, grinders, centrifuges, pumps, fans and blowers used in material handling, packaging, food processing, and commercial laundry. Control mode is standard volt / frequency. A few options are available. Specifications, Catalog
| |
| | | G5HHP Drive: 460 VAC 350 to 1500 HP, 600 VAC 450 to 1800 HP
| | | Suggested Use: High Horsepower The G5HHP is a high horsepower AC drive. The drive is of modular design with separate rectifier and inverter sections installed in a common enclosure. The sections can be paralleled to increase capacity. The drive is available in constant torque and variable torque ratings. The G5HHP provides 3 modes of control and speed accuracy to suit application requirements; V/Hz (2%), sensorless vector (0.1%), or flux vector control (0.01% with motor-mounted encoder and drive-mounted PG-X2 card required). Programmability, network capability, and flexibility are outstanding. Specifications
| |
| | | G5 GPD515 Drive 600 Volt 2 to 200HP
| | | Suggested Use: All conventional Industrial Applications
The G5 Drive 600 Volt produces an output of adjustable voltage and frequency to control the speed of a squirrel cage induction motor. This PWM design provides low motor noise and high starting torque. Current overload rating is 150% for 60 seconds. The drive provides 3 modes of control and speed accuracy to suit application requirements; V/Hz (2%), sensorless vector (0.1%), or flux vector control (0.01% with motor-mounted encoder and drive-mounted PG-X2 card required). Specifications
| |
| | | P5 GPD506 Drive 600 Volt 2 - 200 Horsepower Variable Torque
| | 
| Suggested Use: Industrial Fan and Pump This P5 Drive is rated for 600 volt. The drive rated for variable torque applications with current overload rating of 120% for 60 seconds. Standard features include setpoint (PID) control, energy-savings mode, power-consumption monitoring, and harmonic distortion reduction. Ideal applications include fans, pumps, grinders, buffers, centrifuges, and saws. Specifications
| |
| | | VS mini: 1/8 - 1 Horsepower Single-phase 115 VAC AC Drive
| | 
| Suggested Use: Simple OEM Machines, Single-phase, 115VAC
The VS mini Drive is available in 1/8 through 1 HP models, for 115 VAC single-phase input, with a 230 VAC, 3-phase output for conventional induction motors. Although small in size, the VS mini offers power and versatility for a wide range of applications including material handling, packaging, mixing, pumping, commercial wash machines, recreation equipment (treadmills), overhead doors and general industrial applications. Specifications
| |
| | |
